Panasonic KX-TDA30

6.2 Installation of the Hybrid IP-PBX — KX-TDA30
Installation Manual 273
Mounting on Concrete or Mortar Wall
CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire
laths or metal plates in the wall.
1. Place the reference for wall mounting (on the last page of this manual) on the wall to mark
the 3 screw positions.
2. Install three anchor plugs (user-supplied) in the wall.
3. Install the screws (included) in the wall.
4. Hook the main unit on the screw heads.
250 mm
130 mm
Hammer
29 mm
Anchor Plug
6.4 mm
Drive the screw
to this position.