Panasonic KX-TDA30

6.8 Connection of 2.4 GHz Portable Stations — KX-TDA30
364 Installation Manual
Registering the PS
The PS must be registered to the Hybrid IP-PBX before it can be used. Programming of both
the PS and Hybrid IP-PBX is required. A PT with multiline display (e.g., KX-T7636 6-line
display) is required for the Hybrid IP-PBX system programming.
Note
For details about system programming using a PT, refer to "2.3.2 PT Programming" and
"3.3 PT Programming" in the Feature Guide.
Entering the System Programming Mode
PT (Administrator Level)
PS (Using the KX-TD7680)
PS (Using the KX-TD7690)
Note
means default value throughout this section.
PS Registration
#
= 1234
System Password for Administrator—
for PT Programming
Programming No.
3 digits
PROGRAM/
PAUSE
System Setting Menu
Select
"SYSTEM SET".
Press POWER
for 2 seconds.
Select
"PS PROGRAM".
4 digits
System Lock Password
If required
FUNC
System Setting Menu
Select
"SYSTEM SETTING".
Press POWER
for 2 seconds.
S1 S1
MENU SEL
S1
SEL
Select
"PS PROGRAM".
4 digits
System Lock Password
If required
ENTR
S1
[690]
001 to 028
PS No.
1 to 4 digits
END
ENTER ENTER
To the PS
operation
below
Extn. No.