6.9 Connection of Doorphones and Door Openers — KX-TDA30
Installation Manual 371
2. Pass the wires through the hole in the base cover, and attach the base cover to a wall
using 2 screws.
Note
Two kinds of screws are included with KX-T30865. Please choose the appropriate kind for
your wall type.
3. Connect the wires to the screws located in the front cover.
4. Re-attach the 2 halves and re-insert the screw.
: when a doorphone plate has been fixed to the wall
: when you wish to install the doorphone directly to the wall
Screw
To terminal box
To terminal box
To Next Page
Loading...
