Panasonic KX-TDA30

6.12 Starting the Hybrid IP-PBX — KX-TDA30
Installation Manual 387
2. Plug the DC connector of the AC adaptor into DC IN 1.
Notes
• The AC adaptor supplied with the Hybrid IP-PBX must be connected to DC IN 1. If an
AC adaptor is connected only to DC IN 2, the Hybrid IP-PBX will not start.
• If you need to connect an additional AC adaptor, plug the DC connector of the
additional AC adaptor into DC IN 2.
AC Adaptor
DC Connector
DC IN 1
2
1
DC Connector
Additional
AC Adaptor
DC IN 2
AC Adaptor
1
2