8.1 Troubleshooting — KX-TDA30
408 Installation Manual
• Noise is frequent while
using the PS.
• Conversations
disconnect while using
the PS.
• Call handover is not
working.
• PS is out of CS coverage
area.
• Locate the CS properly (refer to "6.7.5
Site Survey Using the KX-TCA255/KX-
TD7590" or "6.8.5 Site Survey" ).
• PS stays out of service
when the CS status is
changed from Out of
Service to In Service.
• It may take about 10 s
for CS to start up after
the status has been
changed to In Service.
• Wait until the CS starts up.
PROBLEM PROBABLE CAUSE SOLUTION