2.2 Installation of the Hybrid IP-PBX — KX-TDA100/KX-TDA200
64 Installation Manual
3. Lift the cabinet, attach it to the metal bracket, slide it backwards until it locks, and retain it
with 2 screws (B).
Notes
• Do not block the openings of the cabinet. Allow space of at least 20 cm above and 10
cm at the sides of the cabinet.
• Make sure that the surface behind the cabinet is flat and free of obstacles, so that the
openings on the back of the cabinet will not be blocked.
Screws (B)
Metal Bracket
FRONT
TOP
1
2
To Next Page
Loading...
