181
7. Drive/Shutter/Image Stabilizer
Selecting the Focus Point for the Picture to Save
1
Select a Post-Focus image on
the playback screen. (272)
● Select an image with the [ ]
icon and then press
.
● You can also perform the same
operation by touching the [
]
icon.
2
Touch the focus point.
• When the point is in focus, a green frame
appears.
• If there is no picture with the selected
point in focus, a red frame appears.
A picture cannot be saved.
• The edge of the screen cannot be
selected.
3
Save the picture.
● Touch [ ].
• The picture is saved in JPEG format.
To Next Page
Loading...
Need help?
General
