133
6. Focus/Zoom
[Face/Eye Detection]
The camera automatically detects the faces and eyes of subjects.
When the camera detects a person’s face
/ , an AF area is displayed.
Yellow
AF area to be brought into
focus. The camera selects this
automatically.
White
Displayed when multiple subjects
are detected.
• Eye detection works only for the eyes inside
the yellow frame
.

Specify the Eye to Bring into Focus
Touch the eye to be used for focusing.
• To cancel the settings specified, touch
[
].
• The eye to be in focus cannot be changed when [4K Live Cropping] is set.
• When a person’s eyes are detected, the eye closer to the camera will be
brought into focus.
The exposure will be adjusted to the face. (When [Metering Mode] is set to
[
])
• The camera can detect the faces of up to 15 people.
• If any humans are not detected, the camera operates as [
].
• During recording, you can make the sound pickup range of the built-in mic
work with the face/eye detection function:
[
] [Built-in Mic] (267)
To Next Page
Loading...
Need help?
General
