404
14. Wi-Fi/Bluetooth
Sending Images from the Camera
Operate the camera to send recorded images to a device connected by
Wi-Fi.
Operation flow
1
Select the sending method.
Select the sending method from the [Send Images
While Recording] and [Send Images Stored in the
Camera] camera menus.
2
Select the destination (type of the
destination device).
– [Smartphone] (408)
– [PC] (411)
– [AV device] (415)
3
Select the connection method and then
connect by Wi-Fi.
– [Via Network] (417)
– [Direct] (420)
4
Check the send settings.
– Image send settings (423)
5
[Send Images While Recording]
[Send Images Stored in the
Camera]
Take pictures.
This automatically sends the
recorded pictures as they are taken.
Select an image.
Send the selected images.
To Next Page
Loading...
