450
16. Materials
Message Displays
Meanings of main messages displayed on the camera screen, and
response methods.

Card
[Memory Card Error]/[Format this card?]
• It is a format that cannot be used with the camera.
Either insert another card, or back up any necessary data before formatting. (40)
[Memory Card Error]/[This memory card cannot be used]
• Use a card compatible with the camera. (24)
[Insert SD card again]/[Try another card]
• Unable to access the card. Reinsert the card.
• Insert a different card.
[Read Error]/[Write Error]/[Please check the card]
• Failure to read or write data.
Turn off the camera, reinsert the card, and then turn it on again.
• The card may be broken.
• Insert a different card.
[Recording was cancelled due to the limitation of the writing speed of
the card]
• Insufficient card write speed. Use a card of a supported Speed Class. (24)
• If the recording stops even when you are using a card that meets the specified
Speed Class rating, the data writing speed of the card is getting slow. We
recommend backing up data, and formatting (40).
To Next Page
Loading...
Need help?
General
