33
2. Getting Started
Charging battery
Charging time Approx. 180 min.
• Using the camera body and the supplied AC adaptor.
• The indicated charging time is for when the battery has been discharged
completely.
The charging time may vary depending on how the battery has been used.
The charging time for the battery in hot/cold environments or a battery that has not
been used for a long time may be longer than normal.
• Use the products supplied with the camera for charging.
1
Set the camera on/off switch to [OFF].
• The camera cannot be charged when it is turned on.
2
Insert the battery into the camera.
3
Connect the camera [USB/CHARGE] socket and the AC
adaptor using the USB connection cable.
• Check the direction of the terminals and plug in/out straight holding onto the
plug. (Inserting these at an angle may cause deformation or malfunction)
4
Insert the AC adaptor into the electrical outlet.
• The charging lamp blinks red and charging begins. (34)
To Next Page
Loading...
Need help?
General
