32
2. Getting Started

Removing the Battery
Push the lever in the direction of the
arrow.
• Remove the battery after use.
(The battery will drain if left inserted in the camera for a long period of time.)
• To remove the battery, turn the camera off and wait until the LUMIX
indicator on the screen goes off. (Failure to wait may cause the camera to
malfunction and may damage the card or recorded data.)
• The battery becomes warm after use, during charging, and immediately
after charging.
The camera also becomes warm during use. This is not a malfunction.
• Be careful when removing the battery as the battery will jump out.
To Next Page
Loading...
Need help?
General
