44
2. Getting Started
Attaching the Lens Hood
When recording into strong backlight, irregular reflection may occur within
the lens. The lens hood reduces the inclusion of unwanted light in the
recorded images and lowers the drop in contrast. The lens hood cuts off
excess lighting and improves the picture quality.
• The interchangeable lens (H-FS12032) does not have a lens hood.
To attach the lens hood that came with the
interchangeable lenses (H-FS45150)
1
Align the mark ( ) on the
lens hood with the mark on the
tip of the lens.
2
Rotate the lens hood in the
direction of the arrow until it
stops and then align the mark
( ) on the lens hood with
the mark on the tip of the lens.
To Next Page
Loading...
Need help?
General
