436
15. Connecting to Other Devices
Storing on a Recorder
By connecting the camera to a Panasonic Blu-ray disc recorder or DVD
recorder, you can store the pictures and videos.
Getting started:
• Turn on the camera and recorder.
1
Connect the camera and recorder with the USB
connection cable. (426)
2
Press to select [PC(Storage)] and then press .
3
Operate the recorder to store the images.
• If [USB Mode] is set to [PC(Storage)] in the [Setup] menu, the camera
will be automatically connected to the recorder without the [USB Mode]
selection screen being displayed. (361)
• Take care not to turn off the camera while storage is in progress.
• Images such as 4K videos may not be supported depending on your
recorder.
• Turn off the camera and disconnect the USB connection cable before
removing the card from the camera. Otherwise, the recorded data may be
damaged.
• For the storage and playback procedures, refer to the operating instructions
for the recorder.
To Next Page
Loading...
Need help?
General
