34
2. Getting Started

Charging lamp indications
Charging lamp (Red)
On: Charging in progress
Off: Charging complete
Flashing: Charging error
• You can also charge the battery by connecting a USB device (PC, etc.) and
the camera with the USB connection cable.
In that case, charging may take a while.
• Do not use any other USB connection cables except the supplied one.
This may cause malfunction.
• Do not use any other AC adaptors except the supplied one.
This may cause malfunction.
• After charging, disconnect the connection to the power source.
• When the charging lamp is blinking, the battery is not charging properly.
– The temperature of the battery or surroundings is either too high or too
low. Try charging at an ambient temperature between 10 °C and 30 °C
(50 °F and 86 °F).
– The terminals of the battery are dirty.
Remove the battery and wipe off the dirt with a dry cloth.
• Even when the camera on/off switch is set to [OFF] thus turning the camera
off, it consumes power.
When the camera will not be used for a long time, remove the power plug
from the electrical outlet in order to save power.
To Next Page
Loading...
Need help?
General
