420
14. Wi-Fi/Bluetooth
[Direct]
Directly connect the camera and the destination device.
Select the method for connecting
with the destination device.
[WPS
Connection]
[WPS (Push-
Button)]
Press the WPS button on the destination
device to connect.
• On the camera, press [DISP.] to extend
the connection wait time.
[WPS (PIN code)]
Enter the PIN code into the camera, and
connect.
[Manual
Connection]
Search for the camera on the destination device to connect.
Enter the SSID and password displayed on the camera into the
device.
• Please also refer to the operating instructions for the device to be
connected.
To Next Page
Loading...
