360
13. Menu Guide
[Monitor Display]/
[Viewfinder]
[Brightness]/[Contrast]/[Saturation]/[Red Tint]/[Blue Tint]
This adjusts the brightness, coloring, and red or blue tints of
the monitor/viewfinder.
1
Press to select the setting item, and press
to adjust.
2
Press to confirm the setting.
• It will adjust the monitor when the monitor is in use, and
the viewfinder when the viewfinder is in use.
[Monitor
Luminance]/
[LVF Luminance]
[AUTO]/[-3] to [+3]
Adjusts monitor/viewfinder luminance.
[AUTO]: The brightness is adjusted automatically
depending on how bright it is around the camera.
• Adjusts the monitor luminance when displaying the
monitor, and the viewfinder luminance when displaying
the viewfinder.
• When either [AUTO] is set, or the adjusted value is set to
positive side, the usage period will shorten.
• When the camera’s temperature rises, the camera
may automatically lower the luminance of the monitor
temporarily. When the camera’s temperature cools down,
the luminance will return to the original luminance.
[Eye Sensor]
[Sensitivity]
[HIGH]/[LOW]
This will set the sensitivity of the eye sensor.
[LVF/Monitor Switch]
[LVF/MON AUTO] (automatic
viewfinder/monitor switching)/
[LVF] (viewfinder)/[MON] (monitor)
This will set the method for switching between the
viewfinder and monitor.
• If you press [LVF] to switch the display, the [LVF/Monitor
Switch] setting will also switch.
To Next Page
Loading...
