380
14. Wi-Fi/Bluetooth
Operating the camera in accordance with the smartphone guide.
3
Set the camera to Bluetooth
pairing standby state.
● [ ] [Bluetooth]
[Bluetooth]
[SET] [Pairing]
● The camera enters pairing standby
state and the device name
is
displayed.
4
On the smartphone, select the
camera’s device name.
• (iOS devices) When a message to
confirm the change of destination is
displayed, select [Join].
5
When a message indicating
that device registration is
complete, select [OK].
● A Bluetooth connection between the
camera and the smartphone will be
made.
To Next Page
Loading...
