382
14. Wi-Fi/Bluetooth
Connecting to a Paired Smartphone
Connect paired smartphones using the following procedure.
Enable the Bluetooth function of the camera.
• [ ] [Bluetooth] [Bluetooth] [ON]
On the smartphone, start up “LUMIX Sync”.
• If a message is displayed indicating that the smartphone is searching for
cameras, close the message.
Select [ ].
Select [Bluetooth Setup].
Turn Bluetooth ON.
From [Camera registered] items, select
the camera’s device name.
• Even if you set up pairing with more than one smartphone, you can only
connect to one smartphone at a time.
• When pairing takes some time, canceling the pairing settings on both the
smartphone and camera and re-establishing the connection may result in
the camera being detected correctly.
To Next Page
Loading...
