61
3. Basic Operations
Viewfinder
With information
Without
information
With information
+
level gauge
Without
information
+
level gauge
60
p
60
p
• You can switch the viewfinder/monitor display method:
[
] [ ] [LVF/Monitor Disp. Set] (347)
Using the level gauge
The yellow line indicates the current angle. Correct the angle of the
camera so that it matches the white line.
Horizontal
Vertical
Green (no tilt)
• Even after correcting the tilt, there may still be an error of approx. ±1°.
• When the camera is tilted significantly upwards or downwards, the level
gauge may not be displayed correctly.
• You can adjust the level gauge and reset the adjusted values in [Level
Gauge Adjust.] in the [Setup] menu. (363)
To Next Page
Loading...
