123
Recording Modes
This effect leaves one selected colour to emphasise
impressiveness.
∫ Set the colour to leave in
Set the colour to leave in by selecting a location on the screen.
1 Press [Fn2] to display the setting screen.
•
Setting screen can also be displayed by touching in order of [ ] then [ ].
2 Select the colour you want to leave by moving the
frame with 3/4/2/1.
•
You can also select the colour you want to leave by
touching the screen.
• Press [DISP.] or touch [Reset] to reset the frame position.
3 Press [MENU/SET] to set.
•
You can also set by touching [Set].
• Depending on the subject, the set colour may not be left in.
This effect adds a cast of light to the scene.
[One Point Color]
Items that can be set
Amount of colour left
Small amount of
colour
Large amount of
colour
[Sunshine]
Items that can be set
Colour
Yellow tone/Red tone/Blue tone/White tone
•
Select the colour tone by rotating the
rear dial, and then press [MENU/SET].
To Next Page
Loading...
