49
Preparation
∫ Configuring the function button settings from the on-monitor recording
information screen
Touching [Fn] on the on-monitor recording information screen (P71) also allows you to
display the screen in step
3.
∫ Using function buttons with touch operations
[Fn5], [Fn6], [Fn7], [Fn8], and [Fn9] are used by touching function buttons.
1 Touch [ ].
2 Touch [Fn5], [Fn6], [Fn7], [Fn8], or [Fn9].
•
The assigned function will operate.
• Some functions cannot be used depending on the mode or displayed screen.
• When set to [Focus Area Set], it is possible to display the position setting screen of either AF
area or MF Assist.
• When [Restore to Default] is set, function button settings return to the default configuration.
Not available in these cases:
•
[Fn2] cannot be used in the following cases.
– [Miniature Effect]/[One Point Color]/[Sunshine] (Creative Control Mode)
– [Multi Exp.]
• [Fn3] cannot be used during Time Lapse Shooting.
• [Fn5], [Fn6], [Fn7], [Fn8], and [Fn9] cannot be used when the viewfinder is in use.
To Next Page
Loading...
