14. Menu Guide
391
[Custom] menu ¨ [Monitor / Display (Photo)]
[Level Gauge]
`[ON]/[OFF]
Displays the level gauge which is useful in correcting
camera tilt.
A Horizontal
B Vertical
C Green (no tilt)
0
Even after correcting the tilt, there may still be an error of
approx. n1o.
0
When the camera is tilted significantly upwards or
downwards, the level gauge may not be displayed
correctly.
0
You can adjust the level gauge and reset the adjusted
values in [Level Gauge Adjust.] in the [Setup] ([Monitor /
Display]) menu. (l 398)
[Luminance Spot
Meter]
[ON]/`[OFF]
Specify any spot on the subject to measure the luminance
over a small area.
0
For details, refer to page 266.
[Framing Outline]
[ON]/`[OFF]
Displays the outline for the live view.
[Show/Hide Monitor
Layout]
[Control Panel] `[ON]/[OFF]
[Black Screen] `[ON]/[OFF]
Displays the control panel and black screen when switching
between displays using [DISP.] button. (l 67)
To Next Page
Loading...
