Panasonic SA-VK480EE - Replacement of Pinch Roller Ass’y and Head Block Sub Ass’y

63
• Follow the (Step 1) to (Step 12) of Item 9.7
• Follow the (Step 1) to (Step 3) of Item 9.13
• Follow the (Step 1) to (Step 4) of Item 9.15
9.16.1. Replacement of Pinch Roller Ass’y
and Head Block Sub Ass’y
Step 1 Release catch to remove the Pinch Roller (F) Assy.
Step 2 Release catch to remove the Pinch Roller (R) Assy.
Step 3 Release the catches at the side of head connector.
Step 4 Detach the head connector as arrow shown.
Caution: Avoid exerting strong force as it may damage the
FFC.
Step 5 Remove 2 screws.
Step 6 Remove Head Block Sub Ass’y as arrow shown.