EasyManuals Logo
Home>Paradox>Security System>EVOHD+

Paradox EVOHD+ User Manual

Paradox EVOHD+
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
78
EVOHD+ Installation Guide
Confidential Mode
SECTION [003]: OPTIONS [4] AND [5]
In Confidential Mode, all LEDs will turn off and the display will change until either a button is pressed or an access code is entered.
Figure 26: LCD Screen
Confidential Mode Timer
SECTION [007]
Section [007] determines the amount of time without action before the keypad enters Confidential Mode. The Confidential Mode Timer can be set from 005
seconds to 255 seconds. Default: 120 seconds.
Time Display Option
SECTION [003]: OPTION [8]
Muting
SECTION [004]: OPTION [1]
Beep on Exit Delay
SECTION [004]: OPTION [2]
Chime on Zone Closure
SECTION [004]: OPTION [4]
Beep on Trouble
SECTION [005]: OPTIONS [1] TO [4]
Keypad Tamper Enable
SECTION [006]: OPTION [5]
Digiplex bus
Voltmeter
1. From Normal Mode press and hold the [0] key.
2. Enter the [
INSTALLER CODE] (Default: 000000).
3. Press [
ACC].
NOTE: The voltage may drop during the control panel battery test.
Option [4] OFF = Normal Mode (default)
Option [4] ON = Confidential Mode
Option [5] OFF = LCD screen activated by entering an access code (default)
Option [5] ON = LCD screen activated by pressing a button
Option [8] OFF = Date displayed as yy/mm/dd (default)
Option [8] ON = Date displayed as dd/mm/yy
Option [1] OFF = Audible sounds (default)
Option [1] ON = Mute
Option [2] OFF = Exit Delay beep disabled
Option [2] ON = Exit Delay beep enabled (default)
Option [4] OFF = Chime on Zone Closure disabled (default)
Option [4] ON = Chime on Zone Closure enabled
O
ption [1] OFF = Beep disabled: System Troubles and Clock Loss (default)
Option [1] ON = Beep enabled: System Troubles and Clock Loss
Option [2] OFF = Beep disabled: Communicator Troubles (default)
Option [2] ON = Beep enabled: Communicator Troubles
Option [3] OFF = Beep disabled: Module and Bus Troubles (default)
Option [3] ON = Beep enabled: Module and Bus Troubles
Option [4] OFF = Beep disabled: all Zone Troubles (default)
Option [4] ON = Beep enabled: all Zone Troubles
Option [5] OFF = Keypad's tamper is disabled (default)
Option [5] ON = Keypad's tamper is enabled

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Paradox EVOHD+ and is the answer not in the manual?

Paradox EVOHD+ Specifications

General IconGeneral
BrandParadox
ModelEVOHD+
CategorySecurity System
LanguageEnglish

Related product manuals