ENGLISH
1. Product Description
The Parker Service Master CONNECT is intended for recording the
measured values of the sensors connected. The sensors are con-
nected via two CAN bus network and analog inputs. In the case of sen-
sors with automatic sensor detection, the parameterization of units and
measuring ranges is automatic. In addition, sensors without sensor de-
tection can be used with analog signals as well as a digital input/output
and two frequency channels.
The Parker Service Master CONNECT can be extended by two input
modules providing additional connections and functions.
The Parker Service Master Connect is operated basically by using the
touch-sensitive touchscreen. Alternatively, the main functions can be
selected via the six hardware keys. The USB and LAN connections or
wifi (WLAN) interface can be used to connect the Parker Service Master
CONNECT with a PC or local network to analyze the measured values.
Fig.1 The Parker Service Master CONNECT
147
The Parker Service Master CONNECT V1.0/04/20
Product Description
To Next Page
Loading...
