Parker Service Master CONNECT - Switching the Device on and off

ENGLISH
5.2 Switching the Device On and Off
Switching the Device On
1 When off, press the On/Off key.
Ä The device starts up.
After switching on, the firmware version and serial number are dis-
played.
Switching the Device Off
1 When switched on, press and hold the On/Off key for at least 5
seconds.
Ä The device is switched off.
Alternatively:
1 When switched on, press the On/Off key.
Ä The SHUT DOWN button appears in the display.
2 Press the SHUT DOWN button.
Ä The device is switched off.
171
The Parker Service Master CONNECT V1.0/04/20
Starting Up