ENGLISH
6.10.5 Calculating Channels
The Calculating channels tile displays the following information:
Designation Description
1: The calculation type for channel 1
2: The calculation type for channel 2
3: The calculation type for channel 3
4: The calculation type for channel 4
The menu is used to select the corresponding type of calculation for
each channel. The following calculation types are available:
Designation Description
Subtraction To calculate difference measurements
A condition is the channels have a similar physical
unit
Addition To calculate additions
A condition is the channels have a similar physical
unit
Volume To calculate the flow rate, in liters, within a certain
time
A condition is an active channel with volume flow in
l/min
Power 1 To calculate power
A condition is at least one pressure channel and one
flow channel
Power 2 To calculate power through differential pressure
A condition is two pressure channels and one flow
channel
Moving average To calculate a floating average for a channel
238
The Parker Service Master CONNECT V1.0/04/20
Operation
To Next Page
Loading...
