Parker Service Master CONNECT - Project Management; SPC (Service Project Container)

ENGLISH
6.7 Project Management
Individual settings related to measuring tasks can be stored in an SPC
(Service Project Container).
An SPC serves for:
■ project-related compilation of measured data, templates and media
data
■ exchanging with colleagues or other organizations
■ compressing the measured data which reduces the memory space
required on a USB stick. It has no effect on the internal device mem-
ory.
6.7.1 SPC (Service Project Container)
An SPC consists of the three following folders:
■ Measurement data
■ Templates
■ Media data
An SPC stores data from the following categories:
■ Measurements: Relate to measured data from measurements al-
ready completed
■ Templates: Relate to templates for measurements comprised of the
screen view and settings for individual channels, measuring methods
with corresponding settings, sensor types and parameters, list posi-
tions of the channels
■ Media: PDF files, screenshots, photos, videos* etc.
These settings can be used as templates for new measuring tasks.
An SPC can contain and manage several different measuring tasks.
*This option was not available at the time of the manual going to print.
220
The Parker Service Master CONNECT V1.0/04/20
Operation