Parker Service Master CONNECT - Fig. 11 PIN Assignment, CAN Input Module (SCMI-600-02)

ENGLISH
Refer to the following overview for the PIN assignment:
3 4
5
12
Fig.11 PIN assignment, CAN input module (SCMI-600-02)
PIN Designation
1 Shielding
2 Not connected
3 GND
4 CAN High
5 CAN Low
After connecting the sensors without sensor detection, complete the
necessary settings for the electrical connection and expected signal ac-
cording to the properties of the sensors connected. Refer to Chapter
&"Input Modules A and B" on Page236.
169
The Parker Service Master CONNECT V1.0/04/20
Input Modules