Parker Service Master CONNECT - Creating an SPC (Service Project Container); Fig. 39 Create an SPC (Service Project Container)

ENGLISH
6.7.2 Creating an SPC (Service Project Container)
An SPC must be created prior to starting or after stopping a measure-
ment.
1 Connect the sensors to the device according to your application.
Further information is available in Chapter & "Connecting the
Sensors" on Page172.
2 Set the measurement view required. Further information is avail-
able in Chapter "Edit Channels" on Page200.
3 Open the options and tap on the Save Template as button.
Fig.39 Create an SPC (Service Project Container) (1)
Ä The Save template window opens.
222
The Parker Service Master CONNECT V1.0/04/20
Operation