Parker Service Master CONNECT - Fig. 28 Curve Tools

ENGLISH
In order to analyze measurements which have been saved, various
functions are available using the options provided after pressing the
Curve tools button:
1 Open one of the measurements previously saved. Further infor-
mation is available in Chapter & "File Manager" on Page226.
Fig.28 Curve tools
2 Tap on the button.
Ä The options are displayed.
3 Tap on the Curve tools button.
Ä The functions available are displayed:
Designation Description
Jump to MIN The cursor springs to the minimum value of the
selected channel
Jump to MAX The cursor springs to the maximum value of the
selected channel
Cursor ON/OFF Unhide or hide the cursor
X/Y axis Adjust the scaling of the axes
4 Tap on the appropriate button.
Ä The function selected is performed.
198
The Parker Service Master CONNECT V1.0/04/20
Operation