Parker Service Master CONNECT - Resetting the Device to Its Default Settings

ENGLISH
7.2 Resetting the Device to its Default Settings
You can reset your device to its status on delivery.
INFORMATION
Before resetting the device, make a backup of the data on the device.
Refer to Chapter & "Creating a Backup" on Page250.
IMPORTANT
All the settings and parameters are returned to their default settings
following a reset.
1 Tap on the
button.
2 Navigate to the Settings>System> Save&Reset menu op-
tion.
3 Tap on the Reset device to default settings button.
256
The Parker Service Master CONNECT V1.0/04/20
Troubleshooting