ENGLISH
6.5.2 Data Logger
The Data logger measuring method starts recording of the measured
values by tapping on the Start/Stop button.
Recording is stopped after a defined storage time has elapsed or by
tapping on the Start/Stop button.
After selecting the Data logger measuring method, the device displays
predefined parameters to complete the measurement.
1 Tap on the
button.
Ä The configuration window opens in which to define the param-
eters.
2 Define the values according to your application.
The following settings are available to be defined:
Designation Description
Storage interval Set the storage interval of the measurement
in the format h : m : s : ms
Storage time Set the storage time for the measurement
in the format d : h : m : s When the storage
time has expired, the measurement stops
automatically
Ring buffer If this option is activated, the defined memo-
ry area is continuously overwritten by current
measured data
Recording MIN/MAX If this option is activated, the Min and Max
measured values are also recorded in addi-
tion to the current measured value
206
The Parker Service Master CONNECT V1.0/04/20
Operation
To Next Page
Loading...
