Parker Service Master CONNECT - Technical Specifications; Device Model, Mechanical, and Touchscreen Specs

ENGLISH
11. Technical Data
This chapter contains information on the technical data of the device
and input modules available.
11.1 Device Model
Device Connections Sensors Channels Scanning rate
SCM-600-00 2 CAN bus 24 CAN X 24
>1 ms
24 CAN Y 24
>1 ms
1 D-IN 1 D-IN 1 1 ms
1 D-OUT 1 D-OUT 1 1 ms
2 frequencies 2 2 1 ms
11.2 Mechanical Data
Designation Property
Dimensions 282 × 195 × 85mm
Weight 1.880 g
Type of protection IP65 (EN/IEC 60529:2014), all screw-in connections must
be fitted with sensors or protective caps
Ambient temperature -10 – +50°C
Storage temperature -20 – +60°C
Relative humidity 0 – 80 %
Housing ABS/PC, thermoplastic
Protective casing TPE, thermoplastic elastomer
VESA holder 100 mm × 100 mm / M4 metric
Fold-out stand 40° angle of inclination
Slot 2× for input module
11.3 Touchscreen Data
Designation Property
Type P Cap multi-touchscreen, antireflective
Resolution 800×480pixels
Size 7"
Surface 3 mm glass (scratchproof)
Back-lit display 0 – 100% adjustable
Brightness 450 cd
Reading angle 90° from all angles
264
The Parker Service Master CONNECT V1.0/04/20
Technical Data