Parker Service Master CONNECT - Can Input Module (SCMI-600-02)

ENGLISH
11.7 Can Input Module (SCMI-600-02)
Designation Properties Description
Number 2 CANx-1xx and CANx-2xx
Plug 5-pin, M12×1, socket connector SPEEDCON® connector
CANx-1xx 120 Ω terminating resistor be-
tween PIN4 and PIN5, can be
switched off via software
Galvanic separation (CAN High,
CAN Low and GND) to device
and CANx-2xx
CANx-2xx 120 Ω terminating resistor be-
tween PIN4 and PIN5, can be
switched off via software
Galvanic separation (CAN High,
CAN Low and GND) to device
and CANx-1xx
Interface Measuring bus based on RS-422
Protocols CANopen PDO, SAE-J1939,
CAN Generic
Max. CAN Baud rate 1000 kBit
Sensors, CAN1xx Max. 24
Sensors, CAN2xx Max. 24
Scanning rate, P-channel,
1
1 ms = 1,000 measured values/s
Housing material ABS/PC
Housing sealing TPE
Type of protection IP65 When installed
Ambient temperature -10 – +50°C
Storage temperature -20 – +60°C
269
The Parker Service Master CONNECT V1.0/04/20
Technical Data