ENGLISH
6.13 Creating a Backup
Save the data stored on the device before you reset the device or up-
date the firmware.
INFORMATION
In the case of a data backup, all the SPCs, including the measure-
ments, templates and media data and current firmware on the device,
are saved.
1 Connect a storage medium (e.g. USB stick) to save the data.
2 Tap on the
button.
3 Navigate to the Settings>System> Save&Reset menu op-
tion.
4 Tap on the Create backup button.
250
The Parker Service Master CONNECT V1.0/04/20
Operation
To Next Page
Loading...
