Parker Service Master CONNECT - Resetting Values

ENGLISH
6.2.6 Resetting Values
With regard to resetting certain values, there are further optional func-
tions available via the Reset button:
1 Tap on the
button.
Ä The options are displayed.
2 Tap on the Reset button.
Ä The functions available are displayed:
Designation Description
Delta to zero Reset delta to zero
Channel to zero Reset the channel offset to zero (to max. 2% FS)
D-IN to zero Reset the D-IN counter to zero
D-OUT to zero Reset the D-OUT output to zero
MIN/MAX Reset the Min/Max setting
3 Tap on the respective function to reset the corresponding value.
Ä The value selected is reset.
The selected function resets the values of all the channels.
INFORMATION
It is not possible to reset values when a measurement is in progress.
189
The Parker Service Master CONNECT V1.0/04/20
Operation