ENGLISH
INFORMATION
Please note that the D-IN connection must be activated for the exter-
nal trigger. Refer to Chapter &"D-IN/D-OUT F1/F2" on Page232.
Measurement is started by tapping on the Start/Stop button. The de-
vice waits for the defined trigger to be triggered. Recording of a mea-
sured value starts when the defined trigger is triggered.
Measurement is stopped when the defined storage time has expired or
the Start/Stop button is tapped.
Fig.35 Trigger, settings
212
The Parker Service Master CONNECT V1.0/04/20
Operation
To Next Page
Loading...
