ENGLISH
Mount the device in the following sequence:
1 Assemble the VESA holder at the installation location. Observe
the information in the manual supplied with the VESA holder.
2 Mount the device on the VESA holder.
3 Screw the device using four retaining screws and an appropriate
tool.
Ä The device is mounted.
INFORMATION
The maximum screw-in depth for the retaining screws is 6mm. The
VESA holder and screws necessary for assembly (M4 metric) are
included in the supply package.
175
The Parker Service Master CONNECT V1.0/04/20
Starting Up
To Next Page
Loading...
