Call router configuration task list 498
SmartWare Software Configuration Guide 40 • Call router configuration
Service or
Option Not
Available
(Cont.)
bearer-capability-not-
available
Drop original call The network normally provides the
requested bearer capability, but it is
unavailable at the present time. This can
be due to a temporary network problem
or subscription problem.
service-or-option-not-
available
Drop original call The network or remote equipment cannot
provide the requested service option for
an unspecified reason. This can be a sub-
scription problem.
Service or
Option Not
Implemented
bearer-capability-not-
implemented
Drop original call The network cannot provide the bearer
capability requested by the user.
channel-type-not-imple-
mented
Drop original call The network or the destination equipment
does not support the requested channel
type.
facility-not-implemented
Drop original call The remote equipment does not support
the requested supplementary service.
only-restricted-digital-
available
Drop original call The network cannot provide unrestricted
digital information bearer capability. This
cause indicates that a device has
requested an unrestricted bearer service
but the equipment sending this cause only
supports the restricted version of the
requested bearer capability.
service-or-option-not-
implemented
Drop original call The network or remote equipment cannot
provide the requested service option for
an unspecified reason. This can be a sub-
scription problem.
Invalid Message
invalid-call-reference Drop original call The remote equipment receives a call with
a call reference value that is not currently
in use.
channel-does-not-exist
Drop original call The receiving equipment is requested to
use a channel that is not activated on the
interface for calls. This cause indicates that
the equipment sending this cause has
received a request to use a channel not
activated on the interface for a call.
call-identity-does-not-
exist
Drop original call This cause indicates that a call resume has
been attempted with a call identity, which
differs from that in use for any presently
suspended call.
Table 21. Hunt group drop causes (Continued)
Class Cause
Default Behavior
of the Hunt
Group Service
Description
To Next Page
Loading...