pellenc 200 - Special Case Outside Work Period

22
%
X4
%
%
"- LEVEL EXPERT- PELLENC POWER TOOL BATTERY" Workshop document
Issue 11/2016 ref. : DOCUMENT ATELIER_BATTERIE_EXP_OUTILS_PELLENC_V2_2016_ENG
LEVEL 2 - USER'S TECHNICAL DEPARTMENT
STORAGE PERIOD
1 the battery may not remain 99% steady after
a full charge once disconnected from the char-
ger (normal phenomenon).
After a long storage period (more than 1 month), the capacity displayed at the end of the 1st charge may not be 99
steady.
3- This effect will disappear after 4 work
cycles.
Tip: Discharge your battery down to 0%
while working.
2- Do not recharge the battery again in an
attempt to reach 100%: this may amplify the
imbalance phenomenon as the Li-ion may
become overloaded.
Tip: Disregard the information displayed and
start working.
SPECIAL CASE OUTSIDE WORK PERIOD