31
"- LEVEL EXPERT- PELLENC POWER TOOL BATTERY" Workshop document
Issue 11/2016 ref. : DOCUMENT ATELIER_BATTERIE_EXP_OUTILS_PELLENC_V2_2016_ENG
LEVEL 3 - PELLENC AUTHORISED REPAIRER
Obtain RFID card + cable (ref: 122399)
Connect the cable to the card.
Connect the USB cable to you computer.
ON FIRST USE, YOUR COMPUTER SHOULD DOWNLOAD A PROGRAMME TO MAKE THE CARD RUN.
IT WILL BE BE FUNCTIONAL ONCE THE PILOT PROGRAMME IS INSTALLED (THIS CAN TAKE A FEW MIN-
UTES)
USE OF RFID SYSTEM
To Next Page
Loading...
