102
AK110 Programming Screen Navigation, Pager 1 (2 of 2)
Use the keypad to enter the time
delay between the alarm trigger and
the activiation of pager 1.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Delay Time Screen
Enter new value
Current: 00:10:00
00:10:00
v-Cancel ^
Enter
Pager 1, Delay Time
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00<
On Time 00:00:02
MinTimeOff 12:00:00
Pager 1, On if SW2 is Off
Enter
Pager 1, Not On if SW2 is Off
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO <
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-YES <
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
Press the [Enter] key to choose
whether pager 1 is to be used when
switch 2 (SW2) is off.
Pager 1, Not On if Overfeed Occurs
Enter
Pager 1, On if Overfeed Occurs
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES<
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed NO<
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
Press the [Enter] key to choose
whether pager 1 is to be used when
an overfeed condition occurs.
Pager 1, On Time
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02<
MinTimeOff 12:00:00
Use the keypad to enter the amount
of time pager 1 is to be active once
an alarm condition occurs.
Press the [Enter] key to confirm or
the down arrow key to cancel.
On Time Screen
Enter new value
Current: 00:00:02
00:00:02
v-Cancel ^
Enter
Pager 1, Minimum Time Off
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00<
Use the keypad to enter the amount
of time pager 1 is to be inactive
once an alarm condition is fixed.
Press the [Enter] key to confirm or
the down arrow key to cancel.
Minimum Time Off Screen
Enter new value
Current: 12:00:00
12:00:00
v-Cancel ^
Enter
From Pager 1 (1 of 2)
Enter
Pager 1, High Temperature Setpoint
Enter new value
Current: 104.0
104.0
v-Cancel ^
Use the keypad to enter the high
temperature value over which pager
1 is to be activated.
Press the [Enter] key to confirm or
the down arrow key to cancel.
High Temperature Setpoint Screen
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0<
Off if Sw1 Off-NO
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
Pager 1, Off if SW1 is Off
Enter
Pager 1, Not Off if SW1 is Off
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-NO <
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
On If Alarm On YES
On if Sw1 Off-YES
On If ORP< 630
On If ORP> 770
On If pH> 8.00
On If pH< 7.00
On If Temp< 32.0
On If Temp> 104.0
Off if Sw1 Off-YES <
On if Sw2 Off-NO
On If Overfeed YES
On DELAY 00:10:00
On Time 00:00:02
MinTimeOff 12:00:00
Press the [Enter] key to choose
whether pager 1 is to be used when
the flow switch SW1 is off.
AK110 Programming Screen Navigation, Pager 1, Rev 3 22 Aug 2008
To Next Page
Loading...
