Pentair AK110 - WIZARDS SETUP SCREEN NAVIGATION (1 of 2)

108
Name:Main Pool System Programming
Service Data ( 8:441 ) Communications Security Setup >Wizards Serial # 123456
Configuration Menu, Wizards
AK110 Wizards Setup Screen Navigation (1 of 2)
EnterBack
Wizards Setup Screen, Relay 1
>1:pH, Mix Time 2:ORP, Mix Time 3:Not Used
A:Alarm P:Pager1 P:Pager2 P:Pager3 P:Pager4
Change Control Type Press -> to toggle control type >pH, Mix Time
Change Control Type, Relay 1
Change Control Type Press -> to toggle control type >pH, Cycle Time
Change Control Type, Relay 1
-Confirm Changes Clear existing setup and Reassign NO:7 9:YES
Change Control Confirmation Screen Press the [9] key to accept the most recently selected control type settings or the [7] key to cancel.
Enter
Press the right arrow key [>] to cycle through the available control type options.
Wizards Setup Screen, Relay 2
1:pH, Mix Time >2:ORP, Mix Time 3:Not Used
A:Alarm P:Pager1 P:Pager2 P:Pager3 P:Pager4
Change Control Type Press -> to toggle control type >
ORP, Mix Time
Change Control Type, Relay 2
Change Control Type Press -> to toggle control type >
ORP, Cycle Time
Change Control Type, Relay 2
-Confirm Changes Clear existing setup and Reassign NO:7 9:YES
Change Control Confirmation Screen Press the [9] key to accept the most recently selected control type settings or the [7] key to cancel.
Press the right arrow key [>] to cycle through the available control type options.
Enter Enter
Wizards Setup Screen, Relay 3
1:pH, Mix Time 2:ORP, Mix Time >3:Not Used
A:Alarm P:Pager1 P:Pager2 P:Pager3 P:Pager4
Change Control Type Press -> to toggle control type >Not Used
Change Control Type, Relay 3
Change Control Type Press -> to toggle control type >ProbeClean
Change Control Type, Relay 3
-Confirm Changes Clear existing setup and Reassign NO:7 9:YES
Change Control Confirmation Screen Press the [9] key to accept the most recently selected control type settings or the [7] key to cancel.
Enter
Press the right arrow key [>] to cycle through the available control type options.
Wizards Setup Screen, Alarm
1:pH, Mix Time
2:ORP, Mix Time
3:Not Used
>A:Alarm P:Pager1 P:Pager2 P:Pager3 P:Pager4
Change Control Type Press -> to toggle control type >Alarm
Change Control Type, Alarm
Change Control Type Press -> to toggle control type >Not Used
Change Control Type, Alarm
-Confirm Changes Clear existing setup and Reassign NO:7 9:YES
Change Control Confirmation Screen Press the [9] key to accept the most recently selected control type settings or the [7] key to cancel.
Enter
Press the right arrow key [>] to cycle through the available control type options.
Enter Enter
To Wizards Setup (2 of 2)
Control Options for Relay 1:
1. 2. 3.
pH, Mix Time pH, Cycle Time Not Used
Control Options for Relay 2:
1. 2. 3. 4. 5. 6.
ORP, Mix Time ORP, Cycle Time Not Used PPM, Mix Time PPM, Cycle Time ORP, Cal Hypo
Control Options for the Alarm:
1. 2.
Alarm Not Used
pH > 7.67-OFF 7.50s ORP 490 -OFF 700s _____ 69.0f SW1OFFSW2OFF
Main Status Screen
Back
Control Options for Relay 3:
1. 2. 3. 4. 5. 6. 7. 8. 9.
10. 11. 12. 13.
Not Used ProbeClean Heater Alarm Out pH, Mix Time pH, Cycle Time Aux:MakeUp Daily Weekly PPM, Mix Time PPM, Cycle Time ORP, Mix Time ORP, Cycle Time
9 7
or
9 7
or
9 7
or
Enter
9 7
or
AK110 Wizards Setup Screen Navigation, Rev 3 22 Aug 2008
10.23