Pentair AK110 - Name; System

32
ACU-TROL
®
AK110 Chemical Controller Installation and User's Guide
Name
The Name Setup submenu allows the system controlled by the Controller to be specifically identified on the Controller
and in its communication with other devices. The name of the Controller is particularly useful when using remote
communication devices such as the standard and wireless modem. Naming each aquatic system, pool, or spa will make
it easier to identify each Controller and verify its location before making modifications to the system.
The alphanumeric characters that make up the system name are entered using the touch-pad. You have a full range of
letters, numbers and symbols available to aid you in uniquely identifying each system under your control.
Opens a menu where time, date and day can be changed.
• Time:Timeofday;placecursornexttoTIMEselectENTER to set time in hours, minutes, seconds.
• Date:OptionalwithRealTimeClockModule.(Part#724000280)
Date must be set when Real Time Clock is installed. If not installed date with default to 00:00:00.
• Day:OptionalwithRealTimeClockModule.DaymustbesetwhenRealTimeClockisinstalled.
If not installed day with default to 00:00:00.
• Units:SelecttotogglebetweenMetricandEnglishunits.Whenmetricisselectedthedateisdd/mm/yy,
when English is selected the date format is mm/dd/yy.
• Sanitizer:Selectbetween“Cl”(chlorine)and“Br”(bromine).
• OnDelay:PressingEnteronthislineincrements(by15)thenumberofsecondstherelayswillbeoffon
power up.
• BacklightTime:SelecttheamountoftimetheControllerscreenbacklightwillbeoneachtimethecontrol
panel is activated.
• TempDisplay:Displayswatertemperatureinfarnihietdegrees.Toturntemperaturesensoroff,toggleon/off
and select enter.
• ResettoDefault:ReturnsControllertooriginalfactorydefaultsettings.
System