Pentair AK110 - Main Status Screen Navigations

46
Acu-Trol, SN123456
Swimming Pool Automatic Controller AK110E7, 07/22/08
Version Control Screen
pH > 7.67-OFF 7.50s
ORP 490 -OFF 700s _____ 69.0f SW1OFFSW2OFF
Main Status, cursor at pH value
pH 7.67-OFF 7.50s ORP > 490 –OFF 700s
_____ 69.0f SW1OFFSW2OFF
pH 7.67-OFF 7.50s ORP 490 –OFF 700s _____ >69.0f SW1OFFSW2OFF pH 7.67-OFF 7.50s ORP 490 –OFF 700s _____ 69.0f >W1OFFSW2OFF
Main Status, Switch 1 Status Main Status, Switch 2 Status
pH 7.67-OFF 7.50s ORP 490 –OFF 700s _____ 69.0f SW1OFF>W2OFF
Enter new value Current: 7.67 7.67 v-Cancel ^
Calibration Screen, pH
Enter new value Current: 490 490 v-Cancel ^
Calibration Screen, ORP
pH 7.67>OFF 7.50s ORP 490 -OFF 700s _____ 69.0f SW1OFFSW2OFF
Main Status, pH Relay is Off
pH 7.67>ON 7.50s ORP 490 -OFF 700s _____ 69.0f SW1OFFSW2OFF
Main Status, pH Relay turned On
pH 7.67-OFF 7.50s ORP 490 >OFF 700s _____ 69.0f SW1OFFSW2OFF
Main Status, ORP Relay is Off
pH 7.67-OFF 7.50s ORP 490 >ON 700s _____ 69.0f SW1OFFSW2OFF
Main Status, ORP Relay turned On
Enter new value Current: 69.0 69.0 v-Cancel ^
Calibration Sc reen, Temperature
Flow Switch #1 SW1 K => 0.0 pul/g Clear
Flow Switch 1 Setup
Flow Switch #2 SW2 K => 0.0 pul/g Clear
Flow Switch 2 Setup
Enter
Back
Enter
Back
Main Status, cursor at ORP value
Main Status, cursor at Temperature
"Any"
Key
>Name:Main Pool System Programming
Service Data ( 8:441 ) Communications Security Setup Wizards Serial # 123456
Configuration Menu Screen
Enter
Enter
Enter
Back
Enter
Enter
AK110 Main Status Screen Navigation (1 of 2)
Use the keypad to enter the calibrated pH value. Press the [Enter] key to confirm or the down arrow key to cancel.
Use the keypad to enter the calibrated ORP value. Press the [Enter] key to confirm or the down arrow key to cancel.
Use the keypad to enter the calibrated Temperature. Press the [Enter] key to confirm or the down arrow key to cancel.
Press the [Enter] key to manually turn the control relay on or off. If no flow is detected, a warning / verification screen will first appear.
Press the [Enter] key to manually turn the control relay on or off. If no flow is detected, a warning / verification screen will first appear.
Back
Back
Note: The LCD Backlight turns off following a user-defined period of inactivity. Press any key to turn the backlight on. The LCD screen displays 4 horizontal rows at a time. Many menus consist of 5 or more lines. Use the up and down arrow keys to navigate through longer menus to display additional menu options on-screen.
To Timer Screen, pH. Refer to
AK110 Relay and Alarm Timer Screen Navigation
To Timer Screen, pH. Refer to
AK110 Relay and Alarm Timer Screen Navigation
AK110 Main Status Screen Navigation, Rev 3 21 Aug 2008
10.1