Pentair AK110 - CONFIGURATION MENU DETAILS: SECURITY, WIZARDS

35
ACU-TROL
®
AK110 Chemical Controller Installation and User's Guide
To manually reset the Overfeed Timer be sure that the cursor is
beside the TD Reading and press the ENTER button.
This will reset the timer to zero.
Programming
All Off 10 min (NO) Press the Enter button to turn all three relays off for 10 minutes. This feature is useful when calibrat-
ing. After selecting the display will change to (YES) selecting the line again will remove the "All OFF" condition.
 •ClearCalibrations:Clearsallpreviouslyenteredcalibrations
 •ClearData:Erasesalloftheexistingdata.
 •ClearRelayTimers:Resetsalltimerstozeroforallrelays.
Service
Sensor readings are recorded every 2 hours into the data log. Up to 12 lines of data can be recorded a day. The
Controller will save up to 441 lines of data in its data log. When the data log is full the oldest records will be over
written.
The default data log includes the day of operation, the hour sequence, and the sensor readings. When used in
conjuctionwitharealtimeclock,dataincludesdateandhourandsensorreadings.Pressingthedownarrowkeyto
view subsequence data.
When downloading the data with a PC the following information will also be displayed:
Title=MPBPF123:Modem,PCRS232, Front Button pressed, Password entered, Flow S1 on, and relays 1-3 status.
Data