Pentair AK110 - Selecting Items in the Windows; Making Changes

25
ACU-TROL
®
AK110 Chemical Controller Installation and User's Guide
NOTE
Changes must be saved by pressing the nal ENTER.
If ENTER is not pressed as the last step the changes with not be saved.
To change a parameter move the cursor to the parameter and press the ENTER key. The Controller will then open the
value entry screen for that parameter. The Controller navigation system uses the following considerations:
1. Use the right and left arrows to change to a different digit to enter.
2. Press a number on the keypad to change a digit.
3. Press the left button to add a digit and make the number bigger.
4. Press the ENTER button to save the change.
Selecting Items in the Windows
The 16-button touch pad is used to access and modify the different Controller functions:
•PressingtheBACKbuttononthetouchpadwillmovebackonewindow.
•PressingtheBACKbuttonwilltogglebetweenDISPLAYSCREENandMENULIST.Ifthe"REDsecuritylight"is
on a password must be entered to access MENU LIST.
•Pressingthearrowbuttonswillrepositionthecursoronthescreen.TheUPorDOWNarrowbuttonswillscroll
up or down the screens and the RIGHT and LEFT will move arrows to the RIGHT and LEFT on the screen
See page 48 for more detailed navigation instructions.
MAKING CHANGES
WARNING
Press 16 Button touch pad with nger pads only. A sharp object such as a
pen or tool will damage button pads.
!