Pentair AK110 - SECTION 6 OPERATIONS

24
ACU-TROL
®
AK110 Chemical Controller Installation and User's Guide
SECTION 6
OPERATION
Window Navigation
This section introduces window navigating and how to
edit and modify the Controller settings and programs
usingguidelinesandexamplesforselectingandchanging
items.
The Controller provides two main screens for user
operations:
1. Display Screen: for monitoring measurements,
calibrating and manually turning on relays. This is the list
that displays at startup.
2. Menu List: for editing and setup of parameters.
Alarm
Indicator Lights
Light is lit when a
warning or alarm
condition occurs.
FLOW
INDICATOR LIGHTS
Flow is on when light
is lit.
ALPHANUMERIC KEYPAD
Used to enter numeric parameter settings, alphabetic charac-
ters, and special shortcuts for commonly used menus.
ARROW BUTTONS
Up/ Down/ Left/ Right arrow buttons move you
through the AK110's menus.
SECURITY
INDICATOR LIGHT
Light is lit when password
protection is active
.
POWER
INDICATOR LIGHT
Power is on when light is lit.
FLOW
ALARM
POWER
SECURITY
Made in USA
110/220 VAC. 5A Disconnect Power Source Before Servicing Unit
AK110
87 9
54 6
21 3
Back
0
Enter
>Name:Main Pool
System
Programming
Service
Data ( 8:441 )
Communications
Security Setup
Wizards
Serial # 123456
Conguration Menu Screen
pH > 7.67-OFF 7.50s
ORP 490 -OFF 700s
_____
69.0f SW1OFFSW2OFF
Main Status, cursor at pH value